DEKL Precision Technology Group is a global technology leader for the production of highly complex strip and wires parts and assemblies. DEKL China Group of Companies was established in 1993, develops and manufactures precision products of highest quality In Taicang, Tianjin and Guangzhou.
Products
Stamped & fineblanked parts,micro-stamped parts
FINEBLANKED PARTS
Components that push the limits of what can be done today with stamping.We manufacture fineblanked parts with high demands on the functional surfaces in a single operation. The process is characterized by a high proportion of clean-cut, adherence to tight tolerances, a high level of angular accuracy and high flatness.
With our fine blanking presses capable up to 2,500kN total force, we process material thicknesses from 0.3 mm to 6.5 mm.
We specialize in components that push the limits of what is possible with stamping.
Numerous specialized connection technologies (clinching, radial point riveting, pressing, laser welding, resistance welding) enable the production of highly complex assemblies.
Fineblanked parts and assemblies have practical applications in various fields, such as diesel/gasoline injection technology, gears, motors, pumps, turbochargers and mechanical engineering.
MICRO-STAMPED PARTS
The smallest dimensions – a million times over.
The stamping of small holes with large aspect ratios involves meeting the toughest requirements in terms of materials, tools and manufacturing processes. We provide high volume production of apertures in the micrometer range with very tight tolerances. Production facilities developed by DEKL and a sophisticated quality assurance system ensure a consistently high level of quality for our precision products.
Our expertise is in the production of holes with diameters ranging from 50 to 1000 microns, while meeting tolerances of less than 1 micron. Stamping angles can be customized up to a maximum angle of inclination of 50°. An adjustable manufacturing process, with which we can also adjust the hole position and the angle of twist to a given jet geometry, completes our flexible manufacturing process. At the same time, our manufacturing process provides a high level of geometric precision.
Practical applications of micro-stamped parts can be found in gasoline and diesel injection, exhaust gas treatment, medical technology and hydraulics.
The stamping of small holes with large aspect ratios involves meeting the toughest requirements in terms of materials, tools and manufacturing processes. We provide high volume production of apertures in the micrometer range with very tight tolerances. Production facilities developed by DEKL and a sophisticated quality assurance system ensure a consistently high level of quality for our precision products.
Our expertise is in the production of holes with diameters ranging from 50 to 1000 microns, while meeting tolerances of less than 1 micron. Stamping angles can be customized up to a maximum angle of inclination of 50°. An adjustable manufacturing process, with which we can also adjust the hole position and the angle of twist to a given jet geometry, completes our flexible manufacturing process. At the same time, our manufacturing process provides a high level of geometric precision.
Practical applications of micro-stamped parts can be found in gasoline and diesel injection, exhaust gas treatment, medical technology and hydraulics.
SPECIALITY WIRES
Round or flat wire for special applications and sophisticated assemblies. Production of customized flat wires for almost all applications.
Solar ribbons
Base materials
Cu-ETP1
Dimensions
Thickness: 0.06-0.60 mm
Width: 0.06-15.00 mm
Coating processes
Hot-dip tinning
Other special processes available on request
Coating processes
SnPbAg 62/36/2
SnAg 96.5/3.5
Sn 99.9
SnPb 60/40
SnBi 60/40
SnBiAg 60/35/2
SnBi 50/50
SnBiAg 50/48/2
Layer thickness
10-30 μ
Strength
Extra soft, <235 MPa
Elongation
30%
Special designs
Solar wires to customer specifications
Flat wire for springs and similar applications
Grades:
Carbon steels / SiCr steels
Rust and acid-resistant steels
Special materials
Designs:
Cold rolled
Hardened + annealed
Annealed
Finish annealed
Dimensions:
Thicknesses: 0.20 –> 3.25 mm
Widths: 1.00 –> 7.00 mm
Tolerances: Depending on size and grade
Thickness: ±0.02 –> 0.008 mm
Width: ±0.1 –> 0.03 mm
Edge shapes:
Milled edge, square and rectangular profiles
Rounded edges
Surfaces:
Bare / slip-coated / phosphated
Polished
Delivery options:
In layers wound on spools, cardboard core, or coreless
Weight per unit of 40 – 400 kg
Reed wire for weaving combs